Fiber Laser Technology
Metal Laser Cutting Services in UAE
Industrial fiber laser cutting for stainless steel, aluminium, mild steel, brass and copper. Clean edges, tight tolerance, from one piece to production runs.
30+
CNC Machines
25mm
Max Steel Thickness
±0.05mm
Precision
24–48h
Rush Available
About Our Service
Professional Metal Laser Cutting in the UAE
What is Metal Laser Cutting?
Metal laser cutting uses a high-powered, focused laser beam to cut through metal sheets and plates with extreme accuracy. We use fiber laser technology, which produces a 1.06-micron beam that metals absorb very well. The result is fast cutting, clean edges even on reflective metals like aluminium and brass, and positional accuracy down to a fraction of a millimetre.
Our facility in the Sharjah–Ajman industrial corridor runs more than 30 CNC machines, including high-power fiber lasers that cut steel up to 25mm thick. We cut daily for fabrication companies, signage makers, contractors, kitchen-equipment manufacturers and machine builders across all seven emirates.
Why fiber laser? Compared with CO2 lasers, fiber lasers are about three times more energy-efficient, cut reflective metals without back-reflection problems, need little maintenance, and run faster. For industrial metal cutting, fiber is the better tool — and it is what we use.
Metals We Cut
Metal Cutting Materials & Thickness
Every common industrial metal, cut with clean edges and fast turnaround. Bring your own sheets or buy material through us.
Stainless Steel
Corrosion-resistant metal for architectural features, food equipment, medical and decorative signage.
Up to 25mm • 304 / 316 / 430
Aluminium
Lightweight and strong for signage, electronics enclosures, automotive and architectural cladding.
Up to 20mm • 5052 / 6061 / 6063
Mild / Carbon Steel
Economical and weldable for brackets, frames, machine parts and general fabrication.
Up to 25mm • Hot / cold rolled
Galvanised Steel
Zinc-coated for outdoor use, HVAC ductwork, electrical enclosures and construction.
Up to 12mm • Outdoor rated
Brass
Decorative copper-zinc alloy for nameplates, hardware and luxury signage.
Up to 10mm • C260 / C360
Copper
High conductivity for busbars, heat sinks, electrical parts and decorative work.
Up to 8mm • C110 / C101
| Metal | Max Thickness | Common Gauges | Edge Quality | Typical Uses |
|---|---|---|---|---|
| Stainless Steel | 25 mm | 0.5–20 mm | Excellent | Signage, architecture, food, medical |
| Aluminium | 20 mm | 0.5–15 mm | Excellent | Signage, electronics, automotive |
| Mild Steel | 25 mm | 1–20 mm | Excellent | Structural, furniture, machinery |
| Galvanised Steel | 12 mm | 0.5–10 mm | Very good | HVAC, outdoor, construction |
| Brass | 10 mm | 0.5–8 mm | Excellent | Decorative, hardware, nameplates |
| Copper | 8 mm | 0.5–6 mm | Excellent | Electrical, busbars, heat sinks |
Industries Served
Metal Laser Cutting Applications
We support a wide range of industries with custom metal fabrication.
Signage & Advertising
Stainless letters, aluminium channel letters, brass nameplates, monument signs.
Architecture & Construction
Facade panels, privacy screens, balustrades, sunshades, cladding.
Interior Fit-Out
Partition screens, ceiling features, wall art, room dividers, mashrabiya.
Industrial Manufacturing
Machine parts, enclosures, brackets, gaskets, flanges, precision components.
HVAC & MEP
Ductwork parts, vents, grilles, dampers, access panels, flanges.
Furniture & Retail
Metal frames, table bases, shelving brackets, display stands, fixtures.
How It Works
Our Metal Cutting Process
1
Submit Your Design
Send DXF, DWG, AI or PDF via WhatsApp with metal type, thickness and quantity.
2
Receive Your Quote
We review and quote, usually within the hour, with optimisation suggestions.
3
Production
Your parts run on our fiber lasers with first-piece inspection and quality checks.
4
Delivery
Finished parts are packaged and delivered across the UAE, or ready for pickup.
Why Choose Us
Benefits of Our Metal Cutting Service
Precise
Fiber laser accuracy with kerf widths as thin as 0.1mm, enabling intricate designs and tight-tolerance parts.
Clean Edges
Nitrogen-assisted cutting gives smooth, oxide-free, burr-free edges that usually need no finishing.
Fast
24–48 hour rush service available; standard orders in 1–2 days, backed by 30+ machines.
All Metals
Stainless, aluminium, mild steel, brass and copper up to 25mm in one facility.
Factory Pricing
High-volume capacity and in-house operation mean competitive rates without cutting quality.
UAE-Wide
Delivery to all emirates, plus optional bending, welding and powder coating.
Delivery Across the UAE
Where We Deliver
We cut in our Ajman facility and deliver to every emirate. Industrial areas, free zones and residential locations are all covered.
Dubai • Sharjah • Ajman • Abu Dhabi • Ras Al Khaimah • Umm Al Quwain • Fujairah • Al Ain • Al Quoz • Jebel Ali • Mussafah • SAIF Zone • Hamriyah Free Zone • Dubai Industrial City
Got Questions?
Metal Laser Cutting FAQ
What metals can you laser cut?
Stainless steel (304/316/430 up to 25mm), aluminium (5052/6061/6063 up to 20mm), mild and carbon steel up to 25mm, galvanised steel up to 12mm, brass up to 10mm, and copper up to 8mm.
How accurate is the cutting?
Fiber laser cutting achieves positional accuracy around ±0.05mm with a kerf of 0.1–0.3mm — far finer than plasma or mechanical cutting, which is ideal for tight assemblies and detailed patterns.
What is the turnaround time?
Rush orders can be done in 24–48 hours. Standard orders take 1–2 working days. Large or complex projects may take 3–5 days. With 30+ machines we hold capacity even during busy periods.
Can you cut reflective metals like aluminium and copper?
Yes. Fiber lasers operate at a wavelength these metals absorb well, so we cut aluminium (up to 20mm), brass (up to 10mm) and copper (up to 8mm) without back-reflection issues.
Is there a minimum order quantity?
No. We welcome single prototypes, small batches and large runs. Laser cutting is digital, so setup cost is minimal even for one-off pieces.
Does the cut need secondary finishing?
Usually not. Nitrogen-assist cutting produces clean, burr-free edges. Optional deburring, brushing, powder coating and polishing are available.
How does laser compare to plasma cutting?
Laser is far more precise (about ±0.05mm vs ±0.5–1mm), gives cleaner edges and finer detail with less waste. Plasma is faster only on very thick plate above 25mm.
What do you need for a quote?
Your design file (DXF, DWG, AI or PDF), material type and grade, thickness in mm, quantity, finish and delivery location. Send it on WhatsApp and we reply within the hour.
More Services
Related Cutting Services
CNC Router Cutting
Precision cutting for wood, MDF, plywood, acrylic and composite panels.
Acrylic Laser Cutting
Flame-polished edges on clear and coloured acrylic for signage and displays.
Screens & Mashrabiya
Custom decorative metal screens and mashrabiya panels for any project.
Ready for Professional Metal Laser Cutting?
Fast turnaround, competitive pricing and delivery across all emirates.